EMD FP7 | ||
|---|---|---|
 | ||
| Data Sheet Information Compiled by: JEAN-DENIS BACHAND | ||
| New: 4 July 2006 | Artwork by: Jean-Denis Bachand | |
| - | ||
| Engine Builder: Winton | Engine: 567B 16 cylinder | |
| Bore & Stroke | 8" X 10" | |
| RPM (Maximum / Minimum) | 800 / 275 | |
| Main Generator: GM - D12D | Horsepower: 1500 | |
| Gear Ratio: 62:15 | Speed: 65 mph | |
| Trucks: 4-Wheel | Configuration: B-B | |
| Traction Motor Blowers: Electrical Drive (4) | Model: GM | |
| Weight: 258,000 lbs | Traction Motors: GM - D27 (four) | |
| Tractive Effort (starting) 64,000 lbs @25% | Tractive Effort (continuous): 40,000 lbs @ 9.3 mph | |
| Multiple Unit Capability: Yes | Dynamic Braking: Yes | |
| Auxilary Generator: Delco A8102 | Alternator: D14 | |
| Air Brake: Westinghouse | Model: 24RL | |
| Compressor: Gardner Denver | Model: WBO | |
| Quantity Built: 376 | Dates: 6/1949 to 12/1953 | |
| - | - | |
| Exterior Dimensions | FP7 | |
| Total Length | 54'-00" | |
| Wheel Diameter | 40" | |
| Truck Wheel Base | 9'-00" | |
| Height to Top Engine Hood | 14'-11.19" | |
| Height to Top Cab | 15'-00" | |
| Cab Width | 10'-08" | |
| Engine Hood Width | 9'-10" | |
| Center Bolster | 34'-00" | |
| Center Front Truck to Front Pilot | 2'-05.5" | |
| Center Rear Truck to Rear Pilot | 2'-05.5" | |
| Distance between Truck Centers | 43'-00" | |
| Minimum Turning Radious | 30 degrees | |
| - | - | |
| Fuel Oil: 1200 | Lubricating Oil: 200 | |
| Engine Cooling Water: 230 | Sand Capacity: 16 cu. ft. | |
| Options: Vapor Clarkson Boiler (Model OK4625): 2000 lbs/hr (and Model OK4616: 1200/lbs/hr for F5B) | ||
| - | ||
|
Reference Sources:
| ||